Download Mitutoyo USB Devices Driver



U-WAVEPAK-BW 1.0.3. Software for PC

Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series. Intel Core i3 or similar, 2 GB RAM; USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit. 2019-04-01 FiiOUSBDACDriver-V4.47.0.exe 끂 92202 2.22 MB 2019-04-01 Installation and usage guide of the new generic USB DAC driver for FiiO players & DAC.pdf. All devices operating in MTP mode are supported. Note: The MTPdrive is not a replacement for the device's factory (or Windows default) device driver. You must be able to connect your device to the computer and have it visible in the Windows Explorer, before it can be mapped as a drive letter using the MTPdrive.

Mitutoyo Bluetooth® U-WAVE
Easy wireless communication using Bluetooth®. This interface allows measurement data to be loaded directly into your smart phone‚ tablet or PC without a receiver.

Mitutoyo
  • For PCs U-WAVEPAK-BW (download here)
  • For smartphones/tablets U-WAVEBAK-BM download from App Store or get from Google Play

Note: For operating U-WAVE Bluetooth Transmitter is required

DOWNLOAD U-WAVEPAK-BW 1.0.3.
___________________________________________________________________________________________________________________

U-WAVEPAK 1.022B Software for PC

Mitutoyo U-WAVE the interface for transmitting measurement data to your PC.
The wireless specification is IEEE802.15.4 base and the range of wireless communication is up to 20 m.
Note: For operating U-WAVE Transmitter and U-WAVE Receiver is required

DOWNLOAD U-WAVEPAK 1.022B

USB Communication Tool

This software tool can generate a simplified inspection certificate based on the calculation result and evaluation profile data of the Surftest.

NOTE:
Make sure to read chapter 1 'Installation' in the user manual after downloading and before installing by executing 'setup.exe'.

USB Communication Program (Roundtest RA-10/120)

Download

This software tool can generate a simplified inspection certificate based on the calculation result and evaluation profile data of the Surftest.

NOTE:
Make sure to read chapter 1 'Installation' in the user manual after downloading and before installing 'setup.exe'.

SJ Tools

This software tool can generate a simplified inspection certificate based on the calculation result and evaluation profile data of the Surftest.

NOTE:

For information on the parameters that have to be set for error-free communication please refer to the user manual.

QM-Height VCP driver

After installing this communication driver from on your computer, the QM-Height QMH-350A, 350B, 600A, and 600B will be capable of USB output from the control unit's micro USB connector (virtual COM-Port VCP).

Please use a conventional micro USB cable for data transfer.

LSM QUICKTOOL (easy-to-operate program for Laser Scan Micrometer)

This program is a simple communication program using the communication function of models
LSM-6000S, 6000, 6100, 6200, 5000, 5100, 5200, 6900, and 9506.
LSM QUICKTOOL supports the following operations:
Basic setting and function setting.
Displaying measurement results on the screen and saving them in a CSV file.
Supported operating systems are Windows 7/8.1(32bit/64bit) and Windows XP (32bit).

*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

Usb

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.


Device Updater

OS Requirements: Windows Vista/7/8/10

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Click hereto download the Device Updater.

Make sure all devices are unplugged during the install process.


Livelink Gen-II

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.


Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.


Drivers

Driver


Windows 32bit drivers click here.

Windows 64bit drivers click here.


Install Instructions

Download Mitutoyo Usb Devices Driver Windows 7


If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Download Mitutoyo USB Devices Driver

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Update Agent for GT's


How do I update my Bully Dog GT Tuner?


Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)


Detailed Steps to Update a GT Tuner

Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?


To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.


  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.



Download Mitutoyo Usb Devices Driver Updater


Download Mitutoyo Usb Devices Drivers