ACARD / 2SAN Technology. The AEC-6712TU is a high performance PCI bus master Ultra SCSI-3 adapter and SCSI bus transfer rate up to 20MB/Sec. AEC-6712TU supports full feature PCI 32-bit bus master transfer capability including PCI enhanced data transfer commands (133MB/Sec). Supports ACARD ASK (ACARD SCSI kernel) Int13h extension supported Built-in ATP-870UW 32bit RISC engine Scatter/Gather operation support Automatic FIFO threshold selection Low command overhead Flash BIOS interface PCI Plug and Play Support SCSI-1, SCSI-2, SCSI-3 Feature Synchronous transfer rates up to 40MB/Sec. ACARD AEC 7720UW - storage controller - ATA-133 - SCSI overview and full product specs on CNET. This item is an ACARD AEC-7732 AEC-7730AUltra320 SCSI to SATA 2 Bridge adapter. It converts a standard SATA CD/DVD/Optical drive to have a SCSI 68-pin connector. The drive and board is in an ESD safe static bag and ESD safe bubble bag. Will be shipped with plenty of foam protection.
Image of ACARD AEC-7720U SCSI TO IDE ADAPTER
Please note that this card is not for hard drives.
The Ultra SCSI-IDE bridge. Converts 40pin IDE to 50pin Male SCSI interface. Supports IDE ATAPI devices such as CD-ROM, CD-R/RW, and DVD-ROM.
I have listed this item : http://www.ebay.com.sg
User id : 123_justdoit
BID PRICE : S$90.00
BUY IT NOW : S$95.00
CONDITION : NEW IN BOX
OVERSEAS MAIL ORDER WELCOME
QTY I HAVE ON HAND : 2 PCS (NEW UNOPENED, IN ORIGINAL BOX)
Features
- On-chip high speed ACARD RISC micro-controller
- SCSI controller, IDE controller and interfaces
- SCSI host interface synchronous transfer rate up to 20 MB/sec
- On board Flash ROM for easy firmware upgrade
- Full Ultra SCSI target features support
- Windows Server 2003 Support
Specifications
- On-chip high speed ACARD RISC micro-controller
- SCSI host interface synchronous transfer rate up to 20 MB/sec
- 40 pin female IDE connector on one side, 50 pin male SCSI connector on the other side
- On board Flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 7
- Full Ultra SCSI target features support
The AEC-7720U Ultra SCSI-IDE bridge is dedicated to general purpose bridge of SCSI (Small Computer System Interface) to IDE (Integrated Device Electronics) interface. With ACARD micro-controller core built-in, it provides more flexibility and stability for highly exploring applications. The AEC-7720U supports IDE ATAPI devices such as CD-ROM, CD-R/RW and DVD-ROM which can be easily attached to the SCSI bus.
With an IDE device installed into LVD SCSI-IDE bridge, it can be connected to SCSI host adapter and work as a standard SCSI peripheral. User can get the maximum benefits and high performance from SCSI Bus and IDE for devices.
Overview
The ARS-2000SUP is a 3.5” Ultra SCSI-to-SATA HDD enclosure that converts your 2.5” SATA HDD to the Ultra SCSI interface by using the latest Ultra SCSI-to-SATA bridge chip from ACARD.
Features
• Built-in high-speed ACARD RISC micro-processor
• Exclusive SCSI-to-SATA bridge
• Converts low-price SATA device to high-performance SCSI interface delivers great savings
• A new and cost-effective SCSI device
• Standard 3.5” form factor with 2.5” SATA HDD inside
• Supports Windows NT/2000/XP/2003/Vista, Linux, Mac and Sun operating systems
• Supports most Ultra SCSI interfaces
• Easy to install and use
• Cost-effective and offers better I/O performance
• Fixed Hard Drive Capacity to 1G, 2G or 8G for special system (ARS-2000SUP-1G, ARS-2000SUP-2G, ARS-2000SUP-8G)
Specifications
• ACARD SCSI-to-SATA Bridge Controller
• Ultra SCSI interface – supports data transfers at up to 20MB/s
• 50pins Ultra SCSI interface
• Supports 2.5” SATA I and SATA II HDDs
• Supports industrial-grade computers
• Built-in flash ROM for easy firmware upgrades
• Selectable SCSI ID from 0 to 7
Acard Scsi & Raid Devices Driver Download For Windows 10 Download
• Dimension: 14.6cm x 10.1cm x 2.5cm (L x W x H)
Acard Scsi & Raid Devices Driver Download For Windows 10 64-bit
* Note: Please refer to Compatibility list for SATA HDDs